A number in a neighbour’s report can look like a convenient answer. Before comparing it with your own results, establish what it applies to and which assumptions support it. The method, purpose and project information may differ.
Ask for the basis of the value
A report should explain how the selected value was established and identify the standard or other agreed method. Check whether it applies to a structure, a particular measurement point or another consideration. An internal alert threshold may also serve a different purpose from the limit used in the technical assessment.
Standard Norge describes calculation methods within the NS 8141 series. This is why a general web article cannot provide a ready-made figure for every house. The responsible specialist needs the information required by the method and must assess the actual circumstances.
Compare like with like
If two reports use different values, compare their arrangements first. Check the building, position, period and measurement method. Ask for an explanation before assuming that either the stricter or higher value is correct.
The same applies when the working method changes during a project. Review an earlier configuration if its assumptions no longer hold. Record the change and when it takes effect.
For an owner, an understandable explanation alongside the readings is often the most useful delivery. Ask us to review the arrangement if the basis of values in a report or specification is unclear.
What to check
- Check whether the figure is an alert threshold or an assessment limit.
- Ask for the method and assumptions behind the value.
- Compare measurement arrangements before comparing figures.