Crack in masonry beside exposed timber framing

Have you noticed a crack in a wall and wondered whether it is getting wider? Start by recording where it is and how it looks. Measurements over time can show whether it is changing and give the person investigating the building a clearer starting point.

Record the starting condition

Take a photograph showing the location and a close-up with a scale. Note the date and room. When taking later photographs, keep the distance, angle and lighting as similar as possible. Photographs help identify the same spot, but small differences between images may come from how they were taken.

Tracking change requires fixed points and a repeatable method. A crack gauge measures movement between points on opposite sides of the crack. The directions it can measure depend on the instrument and how it is installed.

Choose how to follow the crack

With periodic measurements, the same points are read again on later visits. The readings are compared with the initial measurement, showing the change between visits.

Automatic monitoring records more frequently and lets you follow changes between visits. Readings can be displayed as graphs, with notifications linked to selected thresholds. The recording interval, location and notifications need to suit the conditions being monitored.

Read the results alongside other information

Keep a note of nearby work, changes in use and other observations that may be relevant. A change in the readings shows that the measured condition has changed. Establishing the cause requires the results to be considered alongside the condition of the building and other investigations.

A crack gauge tracks local movement across a crack. Tilt sensors track changes in angle, while vibration instruments record vibrations. Choosing the measurement starts with the question you need answered.

For help following a crack, see our crack monitoring service. Tell us where the crack is, when you noticed it and whether you have seen any changes.

Describe the crack you want to monitor.

What to check

  • Record the location and date of your first observation.
  • Keep photographs taken from comparable positions.
  • Note any nearby work or changes you have observed.